INVERTER GENERATOR – P2000i
5.4
Air Filter Maintenance
Should be performed every 6 months or 100 hours. The air filter may need to
be cleaned more frequently when using in unusually wet or dusty areas.
1.
Remove the screws 1 and then remove the cover 2.
2.
Remove the screws 2 and then remove the air filter case cover 2.
3.
Remove the foam element ©.
4.
Wash the foam element in solvent and dry it.
5.
Oil the foam element and squeeze out excess oil. The foam element
should be wet but not dripping.
NOTE
Do not wring out the foam element when squeezing it. This could cause it to tear.
6.
Insert the foam element into the air filter case. Be sure the foam element
sealing surface matches the air filter so there is no air leak.
NOTE
The engine should never run without the foam element.
7.
Install air filter case cover, cover, and screws.
34