Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Table of Contents
1.
delivery)...................................18
2.
Please Read First! ..................19
3.
Safety.......................................19
3.1
Specified conditions of use.......19
3.2
General Safety Instructions ......19
3.3
Symbols on the machine ..........21
3.4
Safety Devices .........................21
4.
Installation and Transport .....22
4.1
Installation ................................22
4.2
4.3
Transport ..................................22
5.
Special Product Features ......22
6.
Initial Operation ......................23
6.1
Installing the chip bag...............23
6.2
Installing the work clamp ..........23
6.3
Mains connection .....................23
7.
Operation ................................23
7.1
Using the laser guide................24
7.2
Mitre Cuts .................................24
7.3
Bevel Cuts ................................24
7.4
Compound mitre cuts ...............25
7.5
cuts...........................................25
8.
Care and maintenance ...........25
8.1
Saw Blade Change...................25
8.2
Replacing the table insert.........26
8.3
Drive belt tensioning.................27
8.4
Adjustments..............................27
8.5
clamp........................................28
8.6
bon brushes..............................28
8.7
Cleaning the machine...............28
8.8
Storage.....................................29
8.9
Maintenance.............................29
9.
Tips and Tricks .......................29
10.
Available Accessories ......29/62
11.
Repair ......................................29
12.
Environment ...........................29
13.
Trouble Shooting....................30
14.
Technical Data ........................30
2.
Please Read First!
These instructions have been written in
a way which facilitates learning of how
to operate your saw safely. These in-
structions should be used as follows:
- Read instructions before use. Pay
special attention to the safety infor-
mation.
- These operating instructions are in-
tended for people with basic techni-
cal knowledge regarding the opera-
tion of a machine like the one
described in these instructions. If
you have no experience whatso-
ever, you are strongly advised to
seek competent advise and
guidance from an experienced per-
son before operating this machine.
- Keep all documents supplied with
the tool so that you and all other
users can access them at any time.
Retain proof of purchase in case of
warranty claims.
- If you lend or sell this machine be
sure to have all machine documents
supplied go with it.
- The equipment manufacturer is not
liable for any damage resulting from
neglect of these operating instruc-
tions.
Information in this manual is denoted
as under:
A
Danger!
Risk of personal injury or environmental
damage.
B
Risk of electric shock!
Risk of personal injury by electric
shock.
c
Drawing-in/trapping hazard!
Risk of personal injury by body parts or
clothing being drawn into the rotating
saw blade.
A
Caution!
Risk of material damage.
3
Note:
Additional information.
- Numbers in illustrations (1, 2, 3
etc.)
- indicate component parts;
ENGLISH
- are consecutively numbered;
- relate to the corresponding num-
ber(s) in brackets (1), (2), (3) etc.
in the neighbouring text.
- Numbered steps must be carried
out in sequence.
- Instructions which can be carried
out in any sequence are marked
with a bullet (•).
- Listings are indicated by an En
Dash (-).
3.
Safety
3.1
Specified conditions of
use
This saw can be used for making rip
and cross cuts, bevel cuts, mitre cuts
and compound mitre cuts.
Work only materials suitable for cutting
by the saw blade fitted (see 'Technical
Data' for available saw blades).
Do not cut workpieces unless they con-
form to the permissible dimensions
(see section 'Operation').
Stock having a round or irregular cross
section (such as firewood) must not be
cut as it cannot be securely held during
cutting. When sawing thin stock layed
on edge, a suitable auxiliary fence must
be used for firm support.
Any use other than the use specified
above is not allowed. Unspecified use,
modifications to the machine, or use of
parts not tested and approved by the
equipment manufacturer may cause
unforeseeable damage!
3.2
General Safety Instruc-
tions
Please also observe the separate do-
cument 'Safety instructions'!
When using this machine observe
•
the following safety instructions, to
minimize the risk of personal injury
or material damage.
Please also observe the special sa-
•
fety instructions in the respective
sections.
Where applicable, follow the legal
•
directives or regulations for the pre-
vention of accidents pertaining to
the use of crosscut saws.
19
Publicidad
Capítulos
Tabla de contenido
