Symbols On The Machine; Safety Devices - Metabo KS 254 Plus Manual De Instrucciones

Observe the maximum speed indi-
•
cated on the saw blade.
A
Hazard generated by tool de-
fects!
Keep the machine and accessories
•
in good repair. Observe the mainte-
nance instructions.
Prior to any use check the machine
•
for possible damage: before opera-
ting the machine all safety devices,
protective guards or slightly dama-
ged parts need to be checked for
proper function as specified. Check
to see that all moving parts work
properly and do not jam. Make sure
that all parts and accessories are
properly installed and safely secu-
red to ensure the safe and trouble-
free operation of the machine.
Do not use damaged or warped saw
•
blades.
Damaged protection devices or
•
parts must be repaired or replaced
by a qualified specialist. Have da-
maged switches replaced by a ser-
vice centre. Do not operate tool if
the switch cannot be turned ON or
OFF.
Keep handles free of oil and grease.
•
A
Risk of injury by noise!
Wear hearing protection.
•
For reasons of noise protection do
•
not use warped saw blades. A war-
ped blade is exiting vibrations to an
especially large extent, which
means noise.
A
Laser radiation hazard!
Laser beams can cause serious eye in-
juries. Never look into the laser outlet.
3.3

Symbols on the machine

A
Danger!
Disregard of the following warnings
could lead to serious personal injury or
material damage.
Symbols on the machine
33
34 35 36
32 Warning: Laser radiation
Class 2 laser: Do not stare into
beam!
33 GS and TÜV safety approval
(not for KS 305 Plus, 120V)
34 Hazardous area warning
35 Do not reach into saw blade area
36 Do not operate tool in damp or
wet environment.
37 Read operating instructions
38 Wear safety goggles and hearing
protection.
Data on the nameplate
39
40
41
42
43 44 45
39 Manufacturer
40 Article number and serial number
41 Machine designation
42 Motor specifications (see also
'Technical Data')
43 Date of manufacture
44 CE mark – This machine meets
the EC directives as per declara-
tion of conformity
45 Waste disposal symbol – Device
can be disposed of by returning it
to the manufacturer
46 Dimensions of permissible saw
blades
3.4

Safety Devices

Retractable blade guard (47)
32
The retractable blade guard protects
against unintentional contact with the
saw blade and from chips flying about.
37 38 Safety lock (48)
The safety lock blocks the retractable
blade guard: the saw blade remains co-
vered and the crosscut saw cannot be
lowered as long as the safety lock is
not disengaged.
Fence (49)
The fence keeps the workpiece from
46
moving while it is cut. The fence must
always be installed during sawing.
ENGLISH
47
48
49
21