13. Trouble Shooting; 14. Technical Data - Metabo KS 254 Plus Manual De Instrucciones

ENGLISH

13. Trouble Shooting

This section describes problems and
malfunctions which you should be able
to resolve yourself. If the measures de-
scribed here do not solve your problem,
see 'Repairs'.
A
Danger!
Many accidents happen particularly in
connection with problems and faults.
Therefore please note:
Always unplug before troubleshoo-
•
ting.
Check that all safety devices are
•
operational again after each fault
service.

14. Technical Data

Voltage
Current draw
Fuse protection
Motor output (S6 20 % 5 min *)
Protection class
Degree of protection
Saw blade speed
Cutting speed
Saw blade diameter (outer)
Arbor bore
Dimensions
Machine in packaging (length × width × height)
Machine ready for operation, rotary table in 90° position
(length × width × height)
Maximum workpiece cross section:
Standard cross cuts (width / height)
Mitre cuts (rotary table 45°) (width / height)
Bevel cuts (track arm holder 45° left) (width / height)
Compound mitre cuts (rotary table 45° / track arm holder
45° left) (width / height)
Weight
Machine in packing
Machine ready to work
Permissible temperature for transport and storage
30
Motor does not run
No mains voltage
check cables, plug, outlet and
•
mains fuse.
No crosscut function
Transport lock activated:
Deactivate the transport lock.
•
Safety lock engaged:
Release safety lock.
•
Sawing performance too low
Saw blade blunt (possibly tempering
marks on blade body):
Saw blade not suitable for material
being cut (see section 'Technical Da-
ta');
Saw blade warped:
Replace saw blade (see section
•
'Maintenance').
V
A
A
kW
IP
-1
min
m/s
mm
mm
mm
mm
mm
mm
mm
mm
kg
kg
°C
Saw vibrates heavily
Saw blade warped:
Replace saw blade (see section
•
'Maintenance').
Saw blade incorrectly mounted:
Remove the saw blade and then
•
mount it again correctly (see chap-
ter "Care and Maintenance").
Saw squeaks during start-up
Drive belt tension too low:
Tighten the drive belt (see section
•
'Maintenance - Drive belt tensio-
ning').
Rotary table stiff
Sawdust build-up under rotary table:
Remove saw dust.
•
KS 254 Plus KS 305 Plus
220–240 220–240
(1~ 50 Hz) (1~ 50 Hz)
8.7 9.4
10 (time-lag) 10 (time-lag)
1.8 2.0
20 20
II II
4700 4100
62 65
254 305
30 30
630 × 575 × 520 630 × 575 × 520
723 × 684 × 580 725 × 758 × 650
145 / 60 200 / 77
100 / 60 140 / 77
145 / 30 200 / 35
100 / 30 140 / 35
25 26
18 19
0 to +40 0 to +40
110–120
(1~ 60 Hz) (1~ 50 Hz)
15 –
16 (time-lag)
– –
20
II
4100 –
65 –
305
1" 30
630 × 575 × 520
725 × 758 × 650
200 / 77
140 / 77
200 / 35
140 / 35
26
19
0 to +40