Publicidad
Idiomas disponibles
Idiomas disponibles
Thermostat Stand (see fig. 2)
1 – micro USB socket for connecting the power cable
2 – removing the thermostat from the stand (start with the bottom of the
thermostat first)
Description of the Receiver (Switching Unit) (see fig. 3)
1 – main switch
position – off
position – on
2 – M/A button (red LED)
3 – MANUAL button (green LED)
Procedure for Removing the Front of the Switching Unit (see fig. 4)
2, 3 – Use a screwdriver to press down and hold the inner lock, remove the
front cover.
4, 5 – Connect the wires to the labelled terminals according to the wiring
diagram, click the cover back in place.
Mobile Application
The thermostat can be controlled using a mobile application for iOS or Android.
Download the EMOS GoSmart app
QR code for downloading the Android app
QR code for downloading the iOS app
Description of Registering and Logging into the Application (see fig. 5)
To use the mobile application, you must first register by tapping the Sign Up button.
Enter your country and e-mail address, check off your consent with the end user
licence agreement and tap Get Verification Code.
Enter the verification code sent to your e-mail.
Then, set the password for your account and tap Done.
Choose whether you want to enable Data Analysis/Personalisation and tap Go
to App.
Connecting the Thermostat to a Wi-Fi network for Control via the
Mobile App (see fig. 6)
Long-press the
Then press and hold the
E2 will appear on the screen and the
button for about 5 seconds.
button for 3 seconds.
for your device.
icon will be flashing.
14
Publicidad
