Emos P56211 Manual De Instrucciones página 20

The remaining set time + the clock will be alternating in the top left corner; you
can cancel the mode prematurely by pressing
HOLD Mode
Permanent manual temperature change.
While in Auto mode, press the
Set the temperature of choice using the
automatically.
The set temperature will be maintained until HOLD mode is cancelled.
Any programmed temperature change will not be carried out.
To cancel HOLD mode, press
Heating Programme Setting Mode
Sets temperature over the course of the whole day (6 temperature changes
in the day).
Press the PRG button. The day number will start flashing (1–7 = Monday to
Sunday).
Press repeatedly to select the days of choice.
Different each day programme – the number of the selected day flashes
Monday to Friday programme –
Saturday to Sunday programme –
All week programme –
Select your programme of choice and confirm with
The time of the first temperature change will be flashing; you can set the time
by repeatedly pressing
The temperature value will begin flashing; set by repeatedly pressing
P1 will appear below the set temperature, indicating the 1st temperature
change in the day.
Confirm by pressing
change (P2 will appear under the temperature).
Set the time and temperature by following the same steps as when setting the
1st temperature change.
Continue the process until all 6 temperature changes (P1 to P6) are set.
Factory pre-set times and temperatures are as follows:
Monday to Friday
Temperature change
P1
P2
P3
P4
P5
P6
button; the HOLD will appear in the bottom right.
.
flashes
flashes
(10 minute increments), then confirm with
. Continue by setting the start of the second temperature
Time
6:30
8:30
12:00
14:00
16:30
22:30
20
.
buttons; the value will be saved
flashes
.
Temperature
20 °C
16 °C
16 °C
16 °C
21 °C
7 °C
.
.