Skoda 6V9 092 155 Instrucciones De Montaje página 11

Tow bar
The accessories are intended for professional fitting. ŠKODA AUTO recommends that they are
fitted by a contractual partner.
Important
Retrofitting a tow bar to your vehicle increases the demand on its cooling system.
As a result, the cooling system parts have to be replaced in accordance with the informa-
tion held by workshop technicians in authorised ŠKODA AUTO specialist service centres.
The tow bar is used to couple trailers in accordance with the restrictions in the vehicle
registration certificate.
The tow bar has been manufactured according to approved documentation and complies
with homologation E8 55R-01 55707.
General data
The tow bar has been designed to comply with Czech and international regulations and has
passed the mandatory strength tests imposed by EU guidelines. The ball hitch is fitted with a
towball with a diameter of 50 mm.
Component index for tow bar set (6V9 092 155) – fig. 1
Component
Tow bar bracket
M10 x 35 fastening bolt
Ball hitch
Key for the lock on the ball hitch control lever
Protective cap for the ball hitch towball
Mounting recess cover cap
Mounting instructions
Note
The electrical installation set for each vehicle must be ordered from the current ŠKODA
Original Accessories range.
The following parts set – order no. 6V9 071 929 – must be ordered separately:
Frame for the recess in the bumper (G – fig. 1)
Cover for the recess in the rear bumper (H – fig. 1)
The following parts must to be ordered separately:
4298 UV activator
If necessary:
Adapter (from the 13-pin to the 7-pin socket)
The spare parts for the set (spare ball hitch and, if required, spare lock for the ball hitch con-
trol lever) can be ordered from the ŠKODA AUTO spare parts catalogue if necessary.
Quantity Item
1 A
4 B
1 C
2 D
1 E
1 F
1
Order no. HHA 381 017
Order no. EAZ 000 001A
EN
11