Electrolux KODGS60TX Manual De Instrucciones página 11

7.2 Setting the function: True Fan Cooking PLUS
WARNING!
Risk of burns and damage to the appliance.
Step 1 Make sure that the oven is cold.
Step 2 Fill the cavity embossment with tap wa‐
ter.
The maximum capacity of the cavity
embossment is 250 ml. Do not refill the
cavity embossment during cooking or
when the oven is hot.
Step 3
Set the function:
Press:
Step 4 Turn the control knob for the temperature to set temperature.
Step 5 Preheat the empty oven for 10 min to create humidity.
Step 6 Put food in the oven.
Refer to "Hints and tips" chapter.
Do not open the oven door during cooking.
Step 7 Turn the knob for the heating functions to the off position to turn off the oven.
- press to turn off the oven. The indicator turns off.
Step 8 After the function ends, carefully open the door. Released humidity can cause burns.
Step 9 Make sure that the oven is cold. Remove the remaining water from the cavity embossment.
7.3 Heating functions
Heating func‐ Application
tion
The oven is off.
Off position
To turn on the lamp.
Light
.
. The indicator turns on. It works only with the function: True Fan Cooking PLUS.
Heating func‐ Application
tion
To bake on up to three shelf po‐
sitions at the same time and to
dry food.
Set the temperature 20 - 40 °C
lower than for Conventional
Cooking.
To add humidity during the
True Fan Cook‐
cooking. To get the right colour
ing / True Fan
and crispy crust during baking.
Cooking PLUS /
To give more juiciness during
Aqua Clean
reheating.
Refer to "Care and cleaning"
chapter for more information
about: Aqua Clean.
ENGLISH 11