Rothenberger RO FL180 Instrucciones De Uso página 17

b) WARNING! Use power tools only with specifically designated battery packs
and respectively battery types. Use of any other battery packs may create a risk
of explosions, injury and fire.
c) When battery pack is not in use, keep it away from other metal objects like paper
clips, coins, keys, nails, screws, or other small metal objects that can make a connec-
tion from one terminal to another. Shorting the battery terminals together may cause
burns or a fire.
d) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If
contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery may cause irritation or burns.
e) Do not use a damaged or modified battery. Damaged or modified batteries can behave
unexpectedly and lead to fires, explosions or injuries.
Do not expose a battery for fire or high temperatures. Fire or temperatures above 130°C
f)
(265°F) can cause an explosion.
g) Follow all the instructions for charging and never charge the battery or the cordless
tool outside the temperature range specified in the operating instructions. Incorrect
charging or charging outside the permitted temperature range can destroy the battery and
increase the fire risk.
6) Service
a) Have your power tool serviced by a qualified repair person using only identical re-
placement parts. This will ensure that the safety of the power tool is maintained.
b) Never service damaged batteries. All maintenance of batteries should only be carried out
by the manufacturer or authorised customer service points.
1.3 Special safety instructions
RO FL180:
You must always insert the correct batteries in the lamp. Using other batteries may cause
injuries and pose a fire hazard.
Always switch off the lamp when not in use.
Remove the battery before adjusting, cleaning and storing the device or changing acces-
sories. These precautionary measures prevent accidental operation of the lamp.
Do not operate the lamp without a window, or with a window that is damaged.
Use the lamp, accessories, etc. as described in these instructions. Take into consideration the
working conditions and tasks required. Using electrical devices for applications other than those
intended can lead to dangerous situations.
Keep your lamp away from heat sources and fires. Do not store your lamp in moist or wet
ambient conditions. Do not store in locations where temperatures may reach or exceed
40 °C. Examples include alcoves, motor vehicles or metal structures during the summer.
Do not expose the lamp to rain or damp conditions.
Do not leave the lamp on while unattended.
The device is designed for use indoors.
Never use an incomplete lamp, or one on which an unauthorized modification has been made.
Do not switch on the lamp if tool parts or guard devices are missing or defective.
Ensure it is steady. Secure the lamp properly if it is attached to a stand.
Do not direct the light beam into the eyes of people or animals.
Do not look into the light source.
In accordance with IEC/EN 62471 for "Photobiological safety of lamps and lamp systems", these
lamps are in the Exempt Group.
Charger and battery:
ENGLISH 13