Jeep Hemlock Manual Del Usuario página 21

BLIZZARD
Removing the battery:
Insert the key supplied in the lock on the frame and, after turning the key counterclockwise to the unlocking position,
proceed to remove the battery from its fixing seat in the frame.
Inserting the battery:
Insert the battery into its seat integrated into the frame of the bicycle until it locks. Check that the battery is correctly
installed and secured by trying to pull it out and/or making sure that it is securely fastened to the frame and does not move.
Battery charging
Before using the electrically power assisted cycle for the first time, the battery must be fully charged using the battery
charger supplied.
The average time to fully charge the battery, which varies according to the residual charge level of the battery, can be
estimated as shown in the table below.
We recommend charging the battery with the specific battery charger after each use of the electrically power assisted
cycle.
CAUTION
Only use the battery charger provided or an approved model with the same technical specifications, taking care to observe
the same methods and precautions of use indicated on the charged or in the manual.
EPAC
Hemlock
Blizzard
Battery charger INPUT
AC 100V-240V 1.8A (Max)
AC 100V-240V 1.8A (Max)
Battery charger OUTPUT
DC 42V 2.0A (Max)
DC 42V 2.0A (Max)
20
Recharge life
5-7 h
5-7 h