Jeep Hemlock Manual Del Usuario página 23

Cold, in general, decreases battery performance. If used during the winter, the battery should be charged and stored at
room temperature and inserted in the electrically power assisted cycle only shortly before it is used.
DANGER
Battery warnings
The battery consists of lithium-ion cells and chemical elements that are hazardous to health and the environment. Do not
use the item if it emits odours, substances or excessive amounts of heat.
• Do not dispose of the product or the battery with household waste.
• The end user is responsible for the disposal of electrical and electronic equipment and batteries in compliance with all
applicable regulations.
• Avoid used, defective and/or non-original batteries, or batteries used for different models or of different brands.
• Do not leave the battery near fire or heat sources. Fire and explosion hazard.
• Do not open the battery or take it apart. Do not strike, throw, or puncture the battery or attach objects onto it.
• Do not touch any substances leaking from the battery, as they are deemed hazardous. Do not allow children or pets to
touch the battery.
• Do not overcharge or short-circuit the battery. Fire and explosion hazard.
• Never leave the battery unattended during charging. Fire hazard! Never touch the charging socket with metal objects.
• Do not immerse or expose the battery to water, rain or other liquids.
• Do not expose the battery to direct sunlight, excessive heat or cold (for example, do not leave the product or battery in a
car in direct sunlight for extended periods of time), or environments containing explosive gases or flames.
• Do not carry or store the battery with metal objects such as hairpins, necklaces, etc. Contact between metal objects and
battery contacts may cause a short circuit resulting in physical injury or death.
Before using the pedal-assisted bicycle, in addition to verifying the state of charge and correct installation of the battery,
to allow an adequate start-up and ensure efficient and safe use of the product, it is always appropriate to carefully check
each part by carrying out the necessary adjustment of the related mechanical components, directly or with the support of
specialized operators, see: adjustment and tightening of the saddle and seatpost channel, adjustment and tightening of the
handlebar and handlebar attachment, adjustment of brakes, adjustment of gearbox, chain and gear lubrication, wheel and
tyre pressure verification, general verification of the correct tightening of the fixing screws, quick release and through pins
as well as a general check that all the parts are in order.
Saddle
The position on the bicycle is very important to ensure the optimal comfort when using the bike, correct pedalling and to
avoid any safety problems.
It is, therefore, important that the saddle and the seat post are positioned and adjusted to suit the rider.
To adjust the height of the saddle, the clamp that secures the seat post in the frame must be loosened and either raised
or lowered as needed, taking care not to pull it out beyond the limit indicated to avoid the risk of breaking the frame. Once
the best position has been found in compliance with the precautions for extracting the seat post, secure it by tightening the
relevant clamp until it is correctly tightened to prevent it from moving and/or becoming unstable.
Generally speaking, the best way to adjust the height of the saddle is to check that when your foot is placed on the pedal at
its lowest point, your leg is almost completely extended.
To adjust the advancement and inclination (if present) of the saddle, loosen the relevant fastening system in the seat post
bracket, allowing the desired position to be set, and then re-tighten the fastening system correctly to prevent play and
movement.
8. First use
22