Elledi STAR 10.2 C Manual De Uso Y Mantenimiento página 45

STAR 10.2 C- STAR 12.2 C
Rev.1 03/08/2017
Use and maintenance manual
Page 45
Protection from rain
T fitting for condensation
Fig.6
This type of installation (See Fig.6) requires a horizontal section to connect to a pre-existing chimney pot.
Respect the slope indicated in figure, in order to reduce the ashes depositing in the horizontal tube. In the lower part of the chimney
pot, there is a "T" type fitting installed with inspection cap, in the same was as the chimney pot opening.
It is prohibited to install a 90° bend for the initial segment, since the ashes would quickly obstruct smoke passage, causing draught
problems in the stove. (See Fig.2)
IT IS MANDATORY TO USE STAINLESS STEEL AIR-TIGHT TUBING WITH SILICONE OR VITON GASKETS.
®