Language Adjustment (Menu 03 Scegli Lingua) (Menu 03 Choose Language); Menu 05 Stato Stufa (Stove State); Menu 06 Ore Lavoro (Work Hours) - Elledi STAR 10.2 C Manual De Uso Y Mantenimiento

5. Confirm by pressing the P5 key to go automatically to MENU' 01 SET OROLOGIO (Menu 01 Set clock).

LANGUAGE ADJUSTMENT (MENU 03 SCEGLI LINGUA) (Menu 03 Choose language)

To adjust the language, follow this procedure:
1. Cut and then restore power to the stove using the main switch located on the back.
2. The display will show FINAL CLEANING and then OFF.
3. Keep the P2 button pressed for 2 seconds the wording MENU SET OROLOGIO (Set clock menu) appears.
4. Press the P2 key twice: the screen will show MENU SCEGLI LINGUA (Choose language menu).
5. Access with key P5: the screen will display the selected language.
6. Pressing the P1 and P2 keys, select the desired language, confirm pressing P5 key.
7. Confirm by pressing the P5 key to go automatically to MENU' 03 SCEGLI LINGUA (Menu 03 Choose language).
Language availability may change according to the version type of the FIRMWARE

MENU 05 STATO STUFA (Stove state)

In this menu, will be possible to verify correct operation of the most important components of the pellet stove and certain values that
characterise its correct operation.
To enter this menu, follow this procedure:
1. Keep the P2 button pressed for 2 seconds the wording MENU SET OROLOGIO (Set clock menu) appears.
2. Press the P2 key 4 times: the screen will show MENU STATO STUFA (Stove state menu).
3. Access with key P5: the screen will display the desired screen.
4. Use the P5 key to confirm and automatically go back to MENU' 05 STATO STUFA (Stove state).
This menu is both used by the C.A.T. (Technical After-Sales Service) in order to understand what caused stove malfunction, and by
private persons when loading pellet inside the hopper.
SMOKE TEMPERATURE

MENU 06 ORE LAVORO (Work hours)

The ORE LAVORO (Work hours) menu shows the total work hours of the stove. It is possible that in some cases the work hours are
not reset, meaning that numbers similar to 5000/15000/25000 are displayed. It will be responsibility of the technicians to reset these
numbers in case of first start-up. This does not indicate that the stove has already worked all those hours, it is only a setting given by
programming during the initial tests done at Elledi, before the stoves are packaged and shipped.
To enter this menu, follow this procedure:
1. Keep the P2 button pressed for 2 seconds the wording MENU SET OROLOGIO (Set clock menu) appears.
2. Press the P2 key 5 times: the screen will show MENU ORE LAVORO (Work hours menu).
3. Access with key P5: the screen will display the desired screen.
4. Confirm by pressing the P5 key to go automatically to MENU' 06 ORE LAVORO (Menu 06 Work hours).
STAR 10.2 C- STAR 12.2 C
Use and maintenance manual
MOTOR REVS
2000
130°C
COCLEA 0
STATO 1
STOVE STATE
Rev.1 03/08/2017
Page 48
AUGER STATE