Stihl BG 56 Manual De Instrucciones página 11

English / USA
!
Warning!
In order to reduce the risk of fire, do not
modify or remove any part of the muffler
or spark arrestor.
Keep spark plug and wire connection
tight and clean. The spark plug electrode
gap should be checked with a feeler
gauge at least every 50 operating hours
and reset if necessary. Fit a new spark
plug if the electrodes are badly pitted.
For any maintenance please refer to the
maintenance chart and to the warranty
statement near the end of this manual.
Store blower in a dry, high or locked
location place and out of reach of
children.
Before storing for longer than a few
days, always empty the fuel tank.
10
Assembling the Blower
5
3
1
: Line up the arrows (1).
: Push the blower tube (2) into the fan
housing stub (3) as far as stop.
: Push the union nut (4) over the fan
housing stub and rotate it in the
direction of the arrow until the tab
(5) engages the hole (6) in the union
nut.
BG 56, BG 86, SH 56, SH 86
2
: Push the nozzle (7) onto the blower
tube (2) as far as lug (8), position 'a'
(long) or position 'b' (short), and
rotate it in direction of arrow to lock
in position.
BG 66, BG 66 C
2
: Push the nozzle (7) onto the blower
tube (2) as far as lug (8), position 'a'
(long), and rotate it in direction of
arrow to lock in position.
BG 56, BG 66, BG 66 C, BG 86, SH 56, SH 86
7
8
a
b
7
8
a
b