nvent SPECTRACOOL S10 1000 Manual De Instrucciones página 15

REAL-TIME-CLOCK SETTING
This controller is equipped with a real time clock for logging the time and date of alarm activities. There are five
parameters designating to the minute, hour, year, month of the year, and day of the month as illustrated in below
table.
Mnemonic Par
t01
t02
t03
t04
t05
SEt
VIEW ALARMS
Alarms may be viewed when the alerting icon
1. On the main screen, press the alerting icon
2. The screen displays the most recent or newest alarm where the alarm code display on line 1 and the alerting
icon is now in steady
3. Press arrow to view next alarm if there are more than one
4. Press arrow to display ESC, then press
VIEW THE ALARMS IN THE ALARM HISTORY FOLDER
1. Follow instructions above to enter the passcode and open the alarm history folder (AHiF).
2. Press button to access to the alarm history.
3. Press arrow to display the mnemonic alarm on line 1 and time, month, and day display on line 2. For
example, low temp alarm (Lt) displays on line 1 and 09:24 and 0706 display on line 2 in sequence. Note
that the time, and date recorded in the alarm history is based on the local real-time-clock if configured after
installation.
4. Press arrow to view next alarm. The controller is able to retain up to 25 events
5. Press arrow until the screen displays ESC, then press button to return to the main screen or if no
action for longer than 60 seconds the screen will be automatically revert to the main screen.
NOTE: If no alarms are present then only ESC will be displayed in the folder.
89159224
Description
Unit of hour (0 - 23)
Unit of minute
Unit of year
Unit of month
Unit of day
Save
© 2022 nVent
is flashing.
button
button to return to the main screen
- 15 -