4.4
Removing food
Clamping
screw
Drain
5.
Completion of operation
. Turn rotary switch to the 0 position.
● The indicator lights go out.
. Clean the appliance - see the following 6. "Cleaning and Care" chapter.
. Switch off the electric main switch upstream of the appliance, or disconnect the mains plug.
6.
Cleaning and Care
CAUTION!
● Do not apply any caustic cleaners to the control panel or rotary switches!
● Do not spray or clean the appliance with water hoses, high pressure cleaners, high pressure
steam cleaners or steam cleaners!
● Follow the instructions supplied by the manufacturer of the cleaning product!
● Do not use any scouring cleaning product or damaged cleaning scrapers! These cause
scratches.
● Stainless steel may not come into prolonged contact with concentrated acids, essence of vinegar,
salt solution, mustard or spice mixtures. Prolonged contact with these substances will damage
the protective coating. Rinse stainless steel surfaces clean and rub them dry after use.
CAUTION! Hot surfaces, hot liquids!
Risk of burning! Risk of scalding if the collecting container is filled with hot liquid! Risk
of burning if touching or hot liquids spill over!
. Do not fill the collecting container too high!
. Whilst draining, check the fill level!
. Wear waterproof protective gloves!
. Exercise appropriate caution!
Drain plug
. Place the collecting container below the drain.
. Check to make sure that the drain is secured
by the clamping screw.
. Carefully remove the drain plug.
. Immediately remove any contamination from
the base.
en
23 / 88