Descargar Imprimir esta página

Cata IAS 770 Manual De Instrucciones página 22

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

4. Select the power level by pressing the key (G)
key(F)
5. The Power level will start at 5. Pressing the Key (G)
will count up the power levels from 5 to 9 in
numerical order. Pressing the Key (F)
the power straight from 9 to 0.
• If you don't choose a power setting within 1 minute, the
induction hob will automatically switch off. You will need
to start again at step 1.
• You can modify the power setting at any time during
cooking.
If the display flashes
setting
This means that:
• You have not placed a pan on the correct cooking zone
or,
• The pan you're using is not suitable for induction
cooking or,
• The pan is too small or not properly centered on the
cooking zone.
No heating takes place unless there is a suitable pan
on the cooking zone.
The display will automatically turn off after 1 minutes if
no suitable pan placed on it or no any other operation.
When you have finished cooking
1. Touching the relevant zone select key(A)
want to switch off.
2.Press the key (F)
to decrease the power to "0" level,
and the heating will stop.
3.Beware of hot surfaces indicator light "H" will show
which cooking zone is hot to touch. It will disappear
when the surface has cooled down to a safe
temperature. It can also be used as an energy
saving function if you want to heat further pans, use
the hotplate that is still hot.
Using the Boost function
Active boost function
1. Select the heating zone by touching the zone select
key (A)
.
2 . Touching the boost control key(D)
indicator show " P " and the power reach Max.
Cancel the Boost function
1. Touching the relevant zone select key(A)
want to cancel.
2. Touching the key(F)
then the cooking zone will revert to level 9.
• The function can work in any cooking zone.
• The cooking zone returns to level 9 after 5 minutes.
will take
alternately with the power
. that you
, the zone
that you
to cancel the Boost function,
or
Using the Keep warm Function
1. Touch the cooking zone selection button that you want
to use Keep Warm, an indicator next to the key will flash.
2. Touch the button key(D)'
the cooking zone indicator will display "
3. If you want to cancel the keep warm, select the cooking
zone you want to operate,and then touch the button
key(D)'
will be off.
Using the Pause Function
The hob have a handy restart function to pause and restart
the cooking process if you're interrupted.
1. When the hob is on and working, press the pause key(E)
and hold for 3 seconds, all burner will stop working,
and all LED indicator will show the symbol "=" .
2.
Press the pause key(E)
all setting will restart at the previous setting.
Using Child Lock Function
You can lock the controls to prevent unintended use (for
example children accidentally turning the cooking zones
on).
When the controls are locked, all the controls except the
OFF control are disabled.
To lock the controls
Touch the key lock control for 3 seconds. The timer
indicator will show "Lo "
To unlock the controls
1. Make sure the Induction hob is turned on.
2. Touch and hold the key lock control for 3 seconds.
3. You can now start using your Induction hob.
When the hob is in the lock mode, all the controls are
disable except OFF , you can always turn the hob off
with the OFF control in an emergency, but you shall
unlock the hob first in the next operation.
Over-Temperature Protection
A temperature sensor equipped can monitor the
temperature inside the Induction hob. When an
excessive temperature is monitored, the Induction hob
will stop operation automatically.
Detection of Small Articles
When an unsuitable size or non-magnetic pan (e.g.
aluminium), or some other small item (e.g. knife, fork,
key) has been left on the hob, the hob automatically go
on to standby in 1 minute. The fan will keep cooling
down the induction hob for a further 1 minute.
Auto Shutdown Protection
Auto shut down is a safety protection function for your
induction hob. It shut down automatically if ever you
forget to turn off your cooking. The default working
times for various power levels are shown in the below
table: .
' and hold for 3 seconds,
'and hold for 3 seconds. The cooking zone
and hold for 3 seconds again,
"

Publicidad

loading