Publicidad
Idiomas disponibles
Idiomas disponibles
1~3
Power level
Default
360
working
timer (min)
When the pot is removed, the induction hob can stop
heating immediately and the hob automatically
switch off after 2 minutes.
People with a heart pace maker should
consult with their doctor before using this unit.
FLEXIBLE AREA
• This area can be used as a single zone, accordingly
to the cooking needs anytime.
• Flexible area is made of two independent inductors
that can be controlled separately. When working as a
single zone, a cookware is moved from one zone to
the other one within the flexible area keeping the
same power level of the zone where the cookware
originally was placed, and the part that is not
covered by cookware is automatically switched off.
• Important：Make sure to place the cookwares
centered on the single cooking zone. The ideal
recipe is an oval or rectangular saucepan, or a
saucepan. Examples of good pot placement and
bad pot placement.
1.To activate the flexible area as a single big zone, press
the zone selected key
hold 3 seconds for the left group or press the zone
selected key
and
seconds for the right group.
2. The flexible zone indicator
lever indicator will be light up.
3. If the pot is moved from the front to the rear part
(or vice versa), the flexible area detects
automatically the new position, keeping the
same power.
4~6
7~8
9
180
120
90
and
at the same time
at the same time hold 3
above to the power lever
4. To inactivate the flexible area, press the zone selected
key
and
at the same time hold 3 seconds
for the left group or press the zone selected
key
and
at the same time hold 3
seconds for the right group.
Using the Timer
You can use the timer in two different ways:
• You can use it as a minute minder. In this case, the
timer will not turn any cooking zone off when the set
time is up.
• You can set it to turn one cooking zone off after the
set time is up.
• You can set the timer for up to 99 minutes.
Using the Timer as a Minute Minder
If you are not selecting any cooking zone
1.
Make sure the cooktop is turned on.
Note: you can use the minute minder even if
you're not selecting any cooking zone.
2.
Touch the Timer key(E)
will start flashing "10" ,and you can set the timer
at this point.
3.
Set the time by touching the "-" or "+" control of the
timer
Hint: Touch the "-" or "+" control of the timer once to
decrease or increase by 1 minute.
Touch and hold the "-"or "+" control of the timer to
decrease or increase by 10 minutes.
Touching the "-" and "+" together, the timer is can
celled, and the timer indicator will turn off.
4.
When the time is set, it will begin to count down
immediately. The display will show the remaining
time .
5.
Buzzer will bips for 30 seconds and the timer
indicator will turn off when the setting time finished.
Setting the timer to turn one or more cooking
zones off
If the timer is set on one zone:
1.
Select the relevant cooking zone which is working
by touching the zone select key (A)
2.
Pressing the Timer key(E)
flashes, and you can set the timer at this point.
3.
Using the"+" and "-" buttons, you can realize the
setting of timing from 1 to 99 minutes.
Hint: Touch the "-" or "+" control of the timer once will
decrease or increase by 1 minute.
Touch and hold the "-" or "+"control of the timer will
decrease or increase by 10 minutes.
Touching the "-" and "+" together, the timer is cancelled,
and the timer indicator will turn off.
4.
When the time is set, it will begin to count down
immediately. The display will show the remaining time
and the timer indicator flash for 5 seconds.
. The minder indicator
.
, the timing indicator
Publicidad
