Grundfos MAGNA3 Manual De Instrucciones página 9

8. Communication
8.1 CIM modules
8.1.1 Fitting the CIM module
Warning
Before fitting the
module, switch off the
power supply. Make
sure that the power
supply cannot be
accidentally switched
on.
9. Fault finding
Warning
Before dismantling the
pump or related parts,
drain the system and
close the isolating
valves on both sides of
the pump as the
pumped liquid may be
scalding hot and under
high pressure.
Warning
If the power supply
cable is damaged, it
must be replaced by the
manufacturer, the
manufacturer's service
partner or a similarly
qualified person.
10. Technical data
10.1 Ambient temperature
0 to 40 °C.
10.2 Maximum system pressure
The maximum system
pressure is indicated on the
nameplate:
PN 6: 6 bar / 0.6 MPa
PN 10: 10 bar / 1.0 MPa
PN 16: 16 bar / 1.6 MPa.
11. Further product information
grundfos.com/MAGNA3-manual
12. Disposal
This product has been
designed with focus on the
disposal and recycling of
materials. The following
average disposal values apply
to all variants of Grundfos
MAGNA3 pumps:
• 85 % recycling
• 10 % incineration
• 5 % depositing.
This product or parts of it must
be disposed of in an
environmentally sound way
according to local regulations.
Subject to alterations.
9