Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
Caution:
!
this symbol indicates that care must
be taken to avoid damaging the appliance
• Do not make modifications of any kind to this appliance.
• The maintenance instructions must be followed to ensure the appliance does not suffer damage and/or excessive wear.
• Do not expose this appliance to the elements (rain, sun, etc.).
• Do not stand objects on the appliance.
• The inside of the appliance must be cleaned only by a skilled professional.
• Regularly inspect the appliance for visible defects. If the appliance is defective in any way, do not use it, and contact a
VORTICE authorised Technical Support Centre without delay.
• If the appliance does not function correctly or develops a fault, contact a VORTICE authorised Technical Support Centre
without delay. Ensure that only genuine original VORTICE spares are used for any repairs.
• If the power supply cable is damaged, have it replaced without delay by a VORTICE authorised Technical Support Centre.
• Should the appliance be dropped or suffer heavy impact, have it checked without delay by a VORTICE authorised Technical
Support Centre.
• The appliance must be installed in such a way as to ensure that under normal operating conditions, no one can come into
contact with any moving parts or live electrical components.
• Should you need to:
- dismantle the appliance, using the proper tools;
- remove the heat exchanger;
- remove the motor module;
- the appliance must first be switched off and disconnected from the electrical power supply.
• Connect the appliance to the electrical power supply/socket only if the rated power of the supply is compatible with the
maximum rated power of the appliance. If not, contact a professional electrician without delay.
• Switch off the system's main switch:
if an operating fault is detected;
before cleaning the outside of the appliance;
if the appliance is not going to be used for any length of time.
• The appliance cannot be used to pilot the operation of water heaters, stoves, etc.; neither must it drain into the hot water
ducts of such appliances.
• The appliance must expel air directly to the outside through a single dedicated duct.
• The flow of extracted air must be clean (i.e. free of grease, soot, chemical and corrosive agents and explosive or flammable
mixtures).
• Keep the air intake and outlet ports of the appliance free of obstructions, to ensure optimum air flow.
• Maximum operating temperature: 45°C
• The appliance cannot be used to pilot the operation of water heaters, stoves, etc.; neither must it drain into the hot water
ducts of such appliances.
• The appliance must expel air directly to the outside through a single dedicated duct.
• The flow of extracted air must be clean (i.e. free of grease, soot, chemical and corrosive agents and explosive or flammable
mixtures).
• Keep the air intake and outlet ports of the appliance free of obstructions, to ensure optimum air flow.
• Maximum operating temperature:
• Specifications for the power supply must correspond to the electrical data on ID plate A (fig.1).
1 1
45°C.
A
33
Publicidad
