Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
Alarm: Sup Probe fault
A fault on the supply air temperature sensor generates this signal. After having resolved the problem (through Technical
Service intervention), you can reset the error (answer "YES" for "CALL SERVICE").
Alarm: T sup probe (T < 5°C)
A locking error message is generated if the T measured by the supply air temperature sensor falls below 5°C. The probe
fault causes the message "Alarm!" to appear on the "HOME" page. Press the [] key to access the "ALARM' menu and the
following will appear:
"SETUP' page
Select the "SETUP" menu and press the [] key on the "MAIN MENU" page.
• Date & Hour.
"DATE&HOUR" page
To set the day of the week and the current time.
Select the "DATE&HOUR" line and press the [] key on the "SETUP" page.
Use the [▲] and [▼] keys to move within the line. Press the [] key to enable editing of the selected item.
Press the [] key again to exit from the edit page and return to the "DATE&HOUR" page. Press the [X] key to return to the
"SETUP" page.
[ ▲ ]
9
9
[
[ ▲ ]
THURSDAY
yy: 22
9
9
]
[
]
9
9
9
9
[
]
[
]
[ ▲ ]
YES
9
9
9
9
[
]
[
]
NO
59
Publicidad
