Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
Outer Display (HMI)
User interface
The user interface is used by means of a graphic display and some keys as shown in the figure below.
The following operations can be performed through the user interface:
• Operating mode selection.
• Temperatures control.
• Alarms management.
Key and display backlighting remains active for about two minutes after the last key is pressed. When backlighting is off,
you can switch it back on again without activating any function by pressing any key.
[▲] []
I
Function 1 recall key.
II
Function 2 recall key.
X
Key to exit from the displayed page.
Key to: increase speed / move to the upper
▲
line or value.
Key to: decrease speed / move to the lower
▼
line or value.
Confirmation key (OK).
"HOME" page
When turned on, the message "WAIT ..." appears on the screen. It then goes to the "HOME" page.
This page allows you to view various data useful for controlling equipment. The data and information that the page can
display are indicated in the figures and table below.
52
• Speed adjustment.
I
Display
II
X
The figure below represents the areas of
the display:
1
3
4
6
2
5
7
Publicidad
