Publicidad
Idiomas disponibles
Idiomas disponibles
1. Place a container under the hot water/steam spout and de-
liver a little water (see section "10. Delivering hot water").
To interrupt hot water delivery manually, press the selection
arrow corresponding to " STOP".
2. Wait a few minutes for the hot water/steam spout to cool
down, then extract (fig. 17) by pressing the release button
(C7). Hold the spout with one hand and with the other,
turn the cappuccino maker and pull it downwards (fig. 23).
23
3. Also remove the steam connection nozzle by pulling it
downwards (fig. 24).
4. Check the hole in the connection nozzle is not blocked. If
necessary, clean using a toothpick.
5. Wash all parts of the spout thoroughly with a sponge and
warm water.
6. Insert the connection nozzle and cappuccino maker on the
spout by pushing them upwards and turning them clock-
wise until they are attached.
12.
CUSTOMIZING THE BEVERAGES
The strength (when required) and quantity of the drinks can be
customized.
1. Make sure the profile (B4) for which you want to customize
the beverage is selected. You can select "MY" beverages for
each of the 6 profiles;
2. From the homepage, press the selection arrow (B2) corre-
sponding to "
" (B6);
3. Select the beverage you want to customize (a directly
selected beverage or from the beverages selection menu
- B3) to enter the customizing screen. The corresponding
accessories must be inserted;
4. (Beverages with coffee only) "CHOOSE COFFEE STRENGTH":
Select the required strength by pressing the selection ar-
rows corresponding to "-" or "+" and press the selection
arrow corresponding to "
5. "COFFEE QUANTITY, STOP TO SAVE": Preparation begins and
the appliance displays the quantity customizing screen in
the form of a vertical bar. The star alongside the bar rep-
resents the current quantity.
24
OK";
6. When the quantity reaches the minimum quantity you can
set, " STOP" appears on the display (B1).
7. When the required quantity is reached, press " STOP".
8. "SAVE NEW SETTINGS?": Press the selection arrow corre-
sponding to "
sponding to "
ESC" to cancel).
The appliance confirms if the values have been saved or not
(depending on the previous selection). Press the selection arrow
corresponding to "
The appliance goes back to the homepage.
Please note!
Cappuccinos and milk-based coffees: the coffee
•
strength is saved first, followed by the quantity of first
milk, then coffee;
•
Hot water: the appliance delivers hot water. Press the se-
lection arrow (B2) corresponding to " STOP" to save the
required quantity.
•
You can also customize the beverages by connecting with
the DeLonghi Coffee Link App.
•
Press "
ESC" to exit programming. The values will not
be saved.
Beverage quantity table
Beverage
ESPRESSO
LONG
COFFEE
DOPPIO+
HOT WATER
13.
MEMORIZING YOUR PERSONAL PROFILE
The appliance allows you to memorise 6 different profiles, each
associated with a different icon.
The customized "MY" beverages "STRENGTH" and "QUANTITY"
values are saved in each profile (see section "12. Customizing
the beverages
"). The order in which all the beverages are
displayed is based on the frequency of selection.
To select or enter a profile, press on the profile currently in
use (B4), press the selection arrow (B2) corresponding to the
"NEXT>" symbol until the required profile is displayed, then
press on the profile.
17
OK" to save (or the selection arrow corre-
OK".
Standard
Programmable
quantity
quantity
1.35 fl oz/
0.68 - 6.09 fl oz/
40 ml
20-180 ml
5.41 fl oz/
3.89 - 8.45 fl oz/
160 ml
115-250 ml
6.08 fl oz/
3.38 - 8.11 fl oz/
180 ml
100-240 ml
4.06 fl oz/
2.70 - 6.09 fl oz/
120 ml
80-180 ml
8.45 fl oz/
0.68 - 15.55 fl oz/
250 ml
20-460 ml
Publicidad
