Publicidad
Idiomas disponibles
Idiomas disponibles
DISPLAYED MESSAGE
TURN MILK FROTH
ADJUSTMENT DIAL
TO CLEAN POSITION
CLEAN
ESC
TURN FROTH ADJUSTMENT
DIAL
DESCALING NEEDED
PRESS OK TO START
(~45MIN)
ESC
OK
REPLACE WATER FILTER
PRESS OK TO START
ESC
OK
GENERAL ALARM. REFER TO
USER MANUAL / APP
POSSIBLE CAUSE
Milk has been delivered recently and the tubes
inside the milk container (D) must be cleaned.
The milk container has been inserted with
the froth adjustment dial (D1) in the "CLEAN"
position.
The machine must be descaled.
The water softener filter (C4) is expired.
The inside of the appliance is very dirty.
The appliance needs descaling and/or the filter
(C4) must be replaced.
REMEDY
Turn the froth adjustment dial (D1) to CLEAN
(fig. 20).
Turn the dial to the required froth position.
Press " OK" to start descaling or "
to descale later. The descaling procedure de-
scribed in section "15. Descaling" needs to be
performed.
Press OK to replace or remove the filter, or ESC
to carry out the procedure later. Follow the in-
structions in section "17. Water softener filter".
Clean the inside of the appliance thoroughly,
as described in section "14. Cleaning". If the
message is still displayed after cleaning, con-
tact Customer Service.
The descaling procedure described in section
"15. Descaling" needs to be performed and/
or the filter needs replacing or removing as
described in section "17. Water softener filter".
28
ESC"
→
Publicidad
