haacon 4591.0,16 Manual De Instrucciones página 8

5. GENERAL
The swivel jib crane is a aluminium construction with variable over-
hang. It is inserted into a box column, which can be attached to the
ground or to the basin edge, and serves for lifting and lowering, as well
as swivelling loads, predominantly in sewage treatment plants.
Manually operated chain hoists or galvanised respectively stainless
steel rope winches are used as hoisting gears.
The crane corresponds to lifting class HC1 in accordance with
DIN EN 13001, with voltage curve parameter s
designed for a total number of voltage cycles (e.g. lifting, pivoting,
lowering) < 1.6x10 (–> chap. 8).
4
6. BOx cOLumN (OPTION)
The box column is not included in the delivery.
Please order separately.
Only the following box columns (standard) may be used for the above
GB
cranes:
4553 – 205938 4573 – 205941
4553 – 205939 4573 – 205955
4553 – 205999 4573 – 205976
4573 – 207845
6.1 Box column fastening
The box columns must be attached sufficiently and according to the
following regulations.
The operator and/or the company assigned by him for carrying out
the mounting are responsible for this. The correct construction of the
mounting must be confirmed (e.g. with mounting protocol).
6.2 Ground, wall mounting with shear connectors
Basis for dimensioning the anchorage is the „Guideline for the Europe-
an Technical Approval of Metal Anchors for use in Concrete", Appendix
C, technology A, for bonded anchors. They are subject on-site to the
responsibility of an engineer having experience of anchorages and
concrete construction.
The following must be observed:
– Impacts and vibrations are inadmissible.
– Anchors are approved for use indoors and for use outdoors, if
no particularly aggressive conditions are present, e.g.:
– Spraying zone of sea water, constant, alternating immersion in
sea water
– Chloric atmospheres, e.g. in indoor swimming pools
– Extreme chemical contaminations, e.g. such as
– in flue gas desulphurating plants
– Anchors may be set in dry and wet concrete, however not in
boreholes filled with water
– Overhead assembly is inadmissible
– The temperature range for use of the anchorages is enc-
losed: 40 °C to +50 °C (max. long-term temperature) to
+80 °C (max. short-term temperature).
The shear connectors must be selected with consideration to the lar-
gest permissible load, with the greatest possible overhang of the crane
for the shear connector system according to approval (ETA-05/0231:
MKT V A4).
094417_a_de_gb_fr_es_pt_it_nl_drehkr_s
Concrete/Underground
– unripped concrete (pressure zone)
– C20/24 (B25) ≤ Concrete strength class ≤ C50/60 after EN
– Normal or without reinforcement, without edge reinforcement
– Perfect compression, no significant cavities
– Minimum concrete thickness: 175 mm
Geometrical characteristic values
– Minimum distance to each concrete edge: 100 mm
=0.00099 and is
3
– Minimum distance between the shear connectors according to re-
Packing, transport, storage
The glass cartridges must be protected against sun exposure and be
stored in a dry place according to the assembly instructions at tempe-
ratures of at least +5 °C to at the most +25 °C.
Glass cartridges with exceeded date of expiry may not be used anymore.
The anchors must be packed and supplied as a mounting unit. The glass
4573 – 205940
cartridges are packed separately from the anchor rods (including hexa-
4573 – 210029
gon nuts and washers).
4573 – 210030
The glass cartridges V-P may only be used with the appropriate anchor
rods V-A A4.
6.3 Generally the following applies:
haacon hebetechnik gmbh – Telefon +49 (0) 9375 - 84-0 – Fax +49 (0) 9375 - 8466
206:2000-12
quirements of the mounting holes and/or after drawing (s. point 12)
– The specifications for mounting the box column can be
inferred from the drawings (item 12).
– The anchors selected by haacon do not replace having the
dimensioning examined by a stress analyst according to
the local operating conditions.
– All other fastenings (selection, dimensioning, design)
are the sole responsibility of the operator, and/or of the
company assigned by him.
8