Husqvarna TC 112 Manual De Usuario página 19

• Move the blade engagement control to the engaged
position (A) to engage the cutting deck.
• Move the blade engagement control to the
disengaged position (B) to disengage the cutting
deck.
To engage and disengage the cutting
deck (TC 114)
WARNING:
deck without a grass catcher or other
accessory installed to the grass discharge.
• Pull out the PTO button to engage the cutting deck.
• Push in the PTO button to disengage the cutting
deck.
1903 - 002 - 06.02.2023
A
B
A
Do not operate the cutting
To set the cutting height (TC 112)
• Pull the cutting height lever in the direction of the
seat and put it in 1 of the notches for the correct
B
cutting height.
To set the cutting height (TC 114)
• Pull the cutting height lever in the direction of the
seat and put it in 1 of the notches for the correct
cutting height.
To operate the product
1. Start the engine. Refer to
page 17 .
2. Release the parking brake. Refer to
release the parking brake on page 18 .
To start the engine on
To apply and
19