Publicidad
Idiomas disponibles
Idiomas disponibles
3. Stop the engine. Refer to
page 20 .
4. Apply the parking brake. Refer to
release the parking brake on page 18 .
5. Connect a garden hose (A) to the deck washout port
(B) and start the water supply.
A
B
6. Sit in the seat and start the engine. Refer to
the engine on page 17 .
CAUTION:
to make sure that the area is clear
before you start the engine.
7. Engage the cutting deck and let it operate at full
throttle until the cutting deck is clean. Refer to
engage and disengage the cutting deck (TC 112) on
page 18 or To engage and disengage the cutting
deck (TC 114) on page 19 .
8. Disengage the cutting deck and stop the engine
Refer to
To engage and disengage the cutting deck
(TC 112) on page 18 or To engage and disengage
the cutting deck (TC 114) on page 19 and To stop
the engine on page 20 .
9. Stop the water supply and disconnect the garden
hose from the deck washout port.
10. Move the product to a dry area.
11. Sit in the seat and start the engine. Refer to
the engine on page 17 .
12. Engage the cutting deck and let it operate until the
cutting deck is dry.
To clean the air intake of the engine
WARNING:
intake has rotating parts which can cause
injury to your fingers.
24
To stop the engine on
To apply and
To start
Examine the area again
To
To start
Stop the engine. The air
•
Open the engine cover. Make sure that the air intake
on the engine is not blocked. Remove grass and dirt
with a brush.
To clean the cooling fan on the transmission
WARNING:
cooling fan rotates and can cause injury to
your fingers.
1. Remove the center chute. Refer to
install the center chute on page 29 .
2. Clean the cooling fan on the transmission with
compressed air.
To remove and install the engine cover
Stop the engine. The
To remove and
A
1903 - 002 - 06.02.2023
Publicidad
