Publicidad
Idiomas disponibles
Idiomas disponibles
the same time, the device can measure the pulse rate simultaneously.
The Pulse Oximeter features in small volume, low power consumption,
convenient operation and being portable. It is only necessary for patient to
put one of his fingers into a fingertip photoelectric sensor for diagnosis,
and a display screen will directly show measured value of Hemoglobin Sat-
uration.
2.1 Classification
Class II b, (MDD93/42/EEC IX Rule 10)
2.2 Features
A. SpO2 value display, Pulse rate value display, bar graph display, Pulse
waveform display
B. The display mode can be changed
C. Screen brightness can be changed
D. Power consumption of the product is low and the two originally equip-
ped AAA batteries can be operated continuously for 20 hours.
E. The product will enter standby mode when no signal is in the product
within 5 seconds.
2.3 Major Applications and Scope of Application
The Pulse Oximeter can be used to measure human Hemoglobin Saturation
and pulse rate through finger, and indicate the pulse intensity by the bar-
display. The product is suitable for being used in family, hospital, oxygen
bar, community healthcare, and etc.
The product is not suitable for use in continuous supervision for pa-
tients.
The problem of overrating would emerge when the patient is suffer-
ing from toxicosis which caused by carbon monoxide, the device is
not recommended to be used under this circumstance.
EN
Publicidad
