NORAUTO 2372772 Manual página 72

Calibration Verification Numbers (CVN)
EN
CNV1:82E10000
• If the vehicle doesn't support this mode. "The selected mode is
not supported!" information is displayed on the screen.
• If multiple modules are detected, the system will prompt you to
select the module before testing.
• Press Up/Down button to select a module, and then press
Return/Confirm button.
3 When decoder is reading the vehicle information, please wait
for several seconds.
In vehicle information menu, press Up/Down button to select
4
the available items you want, and then press Confirm button.
5 Read the retrieved vehicle information on the screen.
6 Press Return/Confirm button to return to the previous menu.
Waveform display
1 Press "Confirm" button to enter real-time waveform interface.
Read Codes
Erase Codes
l/M Readiness
Data Stream
Freeze Frame
Voltage test
Vehicle Information
Press the "OK" button to view
2
View all items
View Graphic Items
Record all data (click to view the data playback function)
View ALL Items
View Graphic Items
Record Select
3 Press the "OK" button to wait for entry
Get supported data steam loading...
• All data is displayed after viewing all items entering the
interface.
71
Diagnostic Menu
Data Stream
Data Stream