Publicidad
Idiomas disponibles
Idiomas disponibles
Failure to observe the installation, use, operation,
maintenance and repair instructions or performance
of these operations by unqualified personnel;
Use on unsuitable and incompatible surfaces.
3 Operation and technical specification
3.1
Operating the machine
The high pressure washer is a professional machine for high pressure
washing with cold water.
It is designed to clean tools, machines,
vehicles, buildings and other surfaces suitable for treatment with a
pressurised water jet. All other uses not mentioned are inappropriate.
3.2
Conditions of use
The high pressure washer has been designed to perform the
functions described in section of this manual only. The machine
must be used in environments conforming to those described in the
paragraph on admissible environmental values.
3.3
Admissible environmental values
Admissible environmental values
Admissible
operating
temperatures
Variations
in
ambient
temperature
Relative humidity range
Vibrations
The machine is not suitable for operating in environments at
risk from fire or explosion.
The machine may not be used in areas with an
explosive atmosphere.
4
Transport and installation
4.1
Lifting and handling
IMPORTANT - Follow the instructions below.
The machine can be delivered from the Manufacturer on a pallet and
packed in a special cardboard box. Before unpacking, the machine
can be transported and handled by means of a lift truck.
Straps
Crate
To unpack the machine, remove the straps holding the cardboard
box to the pallet and remove the box. After the machine has been
+5°C ÷ +40°C
(41° F - 104° F)
Max. 1.1°C / Min (Max 2°F /
Min)
80% or less
≤ 0.5 G
1.
2.
3.
Pallet
unpacked, it must be lifted by passing lifting straps through the two
rear hooks. A number of safety instructions relating to transport are
given below.
The lifting and handling operations required for installation
must be performed using adequate lift equipment and by
specialist personnel trained to perform this type of operation,
adopting all the precautions necessary and recommended in
order to prevent damage to people or things.
4.2
Installation
IMPORTANT - Before proceeding with installation
read the following warnings carefully. Failure to
observe the following warnings could cause injury,
death or damage to equipment.
For reasons of space, the machine is delivered with the handle
folded. Slacken the knobs, position the handle then tighten the
knobs again.
5
Description
Below is a list of the contents of the package delivered to the
customer. If one of the parts listed below is missing, contact the
dealer immediately. To avoid loss during transport, the key is
enclosed in the bag with the technical documents.
1 machine
1 high pressure hose with M22 connectors
1 handgrip
1 wand with nozzle
1 use and maintenance manual
6
Operator instructions
6.1
Safety warnings
IMPORTANT - Failure to observe the following safety
rules may cause injury or damage to equipment.
6.1.1
Checks to be performed before starting up the
machine.
Before using the machine, make sure all safety
devices are positioned correctly and are in good
condition.
6.2
Prohibited operations
Adjustment, maintenance and/or lubrication may not
be performed with the machine on.
6.3
Training
All users must be suitably trained, including with hands-on
experience of the machine. This training should emphasise:
The need for attention and concentration while working;
Children and unfit persons must not use the machine.
Hold the trigger and wand firmly
Do not use the machine on uneven surfaces
Do not direct the jet at animals or persons
Do not direct the jet towards live parts
Do not unplug the power plug by pulling the cable
Do not use electrical extensions
Do not use the machine with faulty guards
Publicidad
