Descargar Imprimir esta página

Thinkcar THINKSCAN Max Manual De Instrucciones página 23

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 67
www.mythinkcar.com
Throttle matching, Brake pad reset, DPF regeneration, Anti-theft matching, Nozzle coding,
Tire pressure reset, Suspension level calibration, Headlight matching, Gearbox matching,
Sunroof initialization, EGR Adaption, Gear Learning, ODO Reset, Airbag Reset, Transport
Mode, A/F Reset, Stop/Start Reset, NOx Sensor Reset, AdBlue Reset (Diesel Engine
Exhaust Gas Filter), Seat Calibration, Coolant Bleeding, Tyre Reset, Windows Calibration
and Language Change.
5.2.1 Maintenance light reset
The lightening of the car maintenance light indicates that the vehicle needs maintenance.
Reset the mileage or driving time to zero after the maintenance, so the maintenance light
will go out and the system will start a new maintenance cycle.
5.2.2 Steering angle reset
Find the position where the car keeps driving straight. With this position as a reference,the
ECU can calculate the accurate angle when the car turns left and right. Generally, after
replacing the steering angle position sensor, replacing the mechanical parts of the steering
system (such as steering gear, steering column, tie rod ball head, steering knuckle),
completing the four-wheel positioning, body repair, etc., it is required to reset the steering
angle to zero.
5.2.3 Battery matching
Battery matching is to use a car diagnostic tool to reset the monitoring unit of the car
battery. By clearing the original breakdown information about the lack of battery power,
rematch the battery. Based on the related information of the existing battery, the monitoring
unit implements monitoring. Battery matching is required in the following situations:
1. Replacement of the main battery needs to utilize battery matching to clear the former
information about the lack of power, thus avoid false information detected by the
relevant control module which will cause the failure of some electronic auxiliary
functions. For example, the vehicle automatically stops; the sunroof can't work by one
key; elec tric windows can't open and close automatically.
2. The battery monitoring sensor uses the battery matching function to re-match the
control module with the monitoring sensor, so as to more accurately detect the use of
the battery power, and avoid receiving wrong information from instrument prompts and
causing false alarms.
5.2.4 ABS exhaust
When the ABS system contains air, it is necessary to exhaust the brake system through
the ABS exhaust function to restore its braking sensitivity. In addition, when replacing the
ABS computer, ABS pump, brake master cylinder, brake cylinder, brake line, and brake
fl uid, the ABS exhaust function is a necessity.
THINKSCAN Max
21

Publicidad

loading