Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
English
Step 2. Dimensions and installation of the decorative panel
The decorative panel can be aesthetically according to the following illustrations.
Semi-recessed model
Remove sliding pin A and sliding pin B on the wooden decor panel and sliding pin B on the outer door of
the dishwasher (see figure A). Once the panel is in place, fix it to the outer door with screws and pins (see
figure B).
1. Take away the four short screws
A
B
Magica l paste r
Magica l paste r
2. Pin up the four long screws
Built-in model
Install the latch on the decorative wood panel and place it in the groove on the outer door of the
dishwasher (see figure A). Once the panel is in place, secure it to the outer door with screws and pins
(see figure B).
1. Take away the four short screws
B
A
2. Pin up the four long screws
Step 3. Adjusting the door spring tension
1. The door springs are factory set to the proper tension for
the exterior door. If wood aesthetic panels are installed, you
will need to adjust the door spring tension. Turn the
adjusting screw to operate the adjuster to tighten or loosen
the steel wire rope.
2. The door spring tension is correct when the door remains
horizontal in the fully open position, but lifts to the closed
position with the slight lift of a finger.
48
infiniton.es
Publicidad
