VERTO 50G137 Manual De Instrucciones página 9

GB
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
CORDLESS SCREWDRIVER
50G137
CAUTION: BEFORE USING THE POWER TOOL READ THIS MANUAL
CAREFULLY AND KEEP IT FOR FUTURE REFERENCE.
DETAILED SAFETY REGULATIONS
• Use ear protectors when operating the drill. Noise hazards may
cause hearing loss.
• Use additional handles supplied with the tool. Loss of control
may cause operator personal injury.
ADDITIONAL INSTRUCTIONS
SCREWDRIVER OPERATION
• Read the manual carefully before using the screwdriver.
• Driver bits and drills should be maintained in good technical
condition. Drills should be sharp. This will reduce screwdriver load
and ensure its durability.
• Use driver bits and drills recommended by the manufacturer only.
• All attempts to modify the screwdriver or its accessories are
inadmissible.
• Do not overload the screwdriver. Let the tool do the work alone. This
will lower wear of the screwdriver and working tool, ensure greater
working efficiency and tool durability.
• Do not use power supply unit with damaged power cord. Such
device should be repaired or replaced.
• Charger and power tool should be always kept clean (with no traces
of dirt or dust).
• Always disconnect the charger from the mains and the tool from
the charger before commencing any work with the screwdriver
(use, repair).
• Do not use the battery in the screwdriver for other purposes.
• Do not try to disassemble the tool.
• Do not expose the tool to excessive temperature or water.
• When the screwdriver is not used for long period of time store it in
cool and dry place.
• Do not use the screwdriver when you see its casing is discoloured
or damaged.
• Do not discharge the battery completely. When the tool is not used
for a long time, charge the battery from time to time. Completely
discharged battery may leak.
• Do not put the charger for lithium-ion batteries into fire or water.
They may explode! Used battery should be taken to recycling point
suitable for this kind of products. Do not dispose of battery to
containers for municipal wastes.
SPECIAL CONDITIONS REGARDING SAFETY OF CHARGER OPERATION
• Keep this manual. It contains important safety rules and rules for
charger use.
• Before using the charger, read all relevant information contained
within this manual, see markings on the charger and the product
it is designed for.
• To reduce the risk of potential personal injury use the charger for
nickel-cadmium batteries only. Other type batteries may explode
and cause personal injury or material damages.
• Do not expose the charger to moisture or water.
• Use of any connecting elements not supplied or not recommended
by the manufacturer of the charger may cause fire, personal injury
or electric shock.
• Make sure the power cord is not located in pathway, it is not exposed
to treading or other danger (e.g. strong tension).
• Do not use extension cord unless it is absolutely necessary. Use
of improper extension cord may cause fire or electric shock. If it is
necessary to use extension cord, first make sure that:
– Extension cord socket matches plug prongs of the original
charger power cord.
– Extension cord is in good technical condition.
• Do not use the charger with damaged cord or plug. Damage should
be repaired by a qualified person.
REGARDING SAFETY FOR
• Do not use the charger after it has been hit, dropped or otherwise
damaged. Entrust the testing and potential repair to authorized
service workshop.
• Do not try to disassemble the charger. Entrust all repairs to an
authorized service workshop. Improper charger assembly may
cause electric shock or fire.
• Disconnect the charger from a power supply before starting any
maintenance or cleaning.
When the charger is not in use, it should be disconnected from
the power network.
CAUTION! This device is designed to operate indoors.
The design is assumed to be safe, protection measures and
additional safety systems are used, nevertheless there is always
a small risk of operational injuries.
Li-ion batteries may leak, set on fire or explode when heated to
high temperature or short-circuited. Do not store the batteries
in a car in hot and sunny days. Do not open the batteries. Li-ion
batteries contain electronic protection devices that, if damaged,
may cause fire or explosion of the battery.
CONSTRUCTION AND USE
Cordless screwdriver can be used with various driver bits of various lengths
with hexagonal shanks 6.35 mm (1/4"). The tool is designed mainly as a
screwdriver, it can also be used with sockets and drills with hexagonal
shanks (6.35 mm) for light drilling tasks (e.g. making of pilot holes).
Cordless, battery-powered power tools are especially useful for works
in interior furnishing, adaptation of premises etc.
Use the power tool according to the manufacturer's instructions only.
DESCRIPTION OF DRAWING PAGES
Below enumeration refers to the device elements depicted on the
drawing pages of this manual.
1. Tool chuck
2. Torque control ring
3. Handle lock
4. Battery level indicator
5. Button for battery level indicator
6. Direction selector switch
7. Socket for charger
8. Switch
* Slight differences may appear between the product and drawing
MEANING OF SYMBOLS
CAUTION
WARNING
ASSEMBLY/SETTINGS
INFORMATION
EQUIPMENT AND ACCESSORIES
1. Charger
2. Drills
3. Driver bits
4. Bit holder
5. Transport case
PREPARATION FOR OPERATION
BATTERY CHARGING
Screwdriver is supplied with partially charged battery. It is
9
- 1 pce
- 3 pcs
- 20 pcs
- 1 pce
- 1 pce