Keysight U1271A Guia Del Usuario página 112

3 Multimeter Features
Capturing Maximum and Minimum Values (MaxMin)
The MaxMin operation stores the maximum, minimum, and average input values
during a series of measurements.
When the input goes below the recorded minimum value or above the recorded
maximum value, the multimeter beeps and records the new value. The elapsed
time since the recording session was started is stored and shown on the display at
the same time. The multimeter also calculates an average of all readings taken
since the MaxMin mode was activated.
From the multimeter's display, you can view the following statistical data for any
set of readings:
– Max: highest reading since the MaxMin function was enabled
– Min: lowest reading since the MaxMin function was enabled
– Avg: average or mean of all readings since the MaxMin function was enabled
– MaxMinAvg: present reading (actual input signal value)
This function is applicable to all measurements except for continuity and diode
NOTE
tests.
1 Press
2 Press
112
to enable the MaxMin operation.
again to cycle through the Max, Min, Avg, or present (MaxMinAvg)
input values.
Keysight U1271A/U1272A User's Guide