4
Multimeter Setup Options
Using the Setup Menu
The multimeter's setup menu allows you to change a number of nonvolatile preset
features. Modifying these settings affects the general operation of your
multimeter across several functions. Select a setting to edit to perform one of the
following:
– Switch between two values, such as on or off.
– Cycle through multiple values from a predefined list.
– Decrease or increase a numerical value within a fixed range.
To contents of the setup menu are summarized in
Table 4-1
Setup menu key functions
Legend
Setup
Dual
E xit
Setup
126
Description
Press
for more than 1 second to access the setup menu.
Setup
Press and hold
until the multimeter restarts to exit the setup menu.
Setup
Press
or
to step through the menu items.
Press
or
at each menu item to change the preset settings. The menu item (in the secondary
Dual
E xit
Setup
display) will flash to indicate that you can now change the values shown in the primary display.
Press
or
again to switch between two values, to cycle through multiple values from a list, or
Dual
E xit
Setup
to decrease or increase a numerical value.
While the menu item is flashing, press
While the menu item is flashing, press
Table 4-2
to save your changes.
to discard your changes.
Keysight U1271A/U1272A User's Guide
on page 128.