Keysight U1271A Guia Del Usuario página 118

3 Multimeter Features
See the
review or erase the recorded entries.
Performing interval logs (AUto)
Ensure that
Set the recording interval duration
1 Press
2 Press
3 Press
The duration set in the steps above will determine how long each recording
interval takes. The input signal value at the end of each interval will be recorded
and saved into the multimeter's memory.
Start the interval log mode
1 Press
118
Reviewing Previously Recorded Data (View)
is selected as the data logging option in the multimeter's Setup.
for more than 1 second to enter the multimeter's Setup mode.
Setup
until
to change the duration or a recording interval from 1 to 99999 seconds
(default 1 second).
to save the changes. Press and hold
restarts.
for more than 1 second to start interval log mode.
and the log entry number are displayed at the top of the display.
Subsequent readings are automatically recorded into the multimeter's memory
at the interval specified in the Setup mode.
is shown on the secondary display. Press
Keysight U1271A/U1272A User's Guide
section later in this manual to
Setup
until the multimeter
Setup
or
Dual
E xit