TAN Bead Maelstrom 9600 Manual Del Usuario página 23

6. Run
2018 / 12 / 31 23 : 59
Use the barcode reader to scan the barcode for "Kit Lot" and "Tip Lot".
After the scan, the lot information will be showed on touch screen. Press
"Done" to confirm the information and go to next step. If you do not
want to record the Lot information, just press "Done" to go to next step.
Press "Delete" to delete all information. "TANBead Plate" is a reagent kit
format using TANBead 96 deep well plate or TANBead 6-well Auto Tube.
"Non-TANBead" is a reagent kit format using any other compatible 96-
well plate rather than TANBead.
Total: 96
The scan will be started from "A1" well position. Scan the corresponding
sample barcode, and the system will guide you to scan the next one
which is "A2". The total number of scanned sample ID is shown on the
top of the table. When this is completed, press "Done" to continue. If you
do not want to scan sample ID, press "Done" directly to go to next step.
23