Brinkmann 810-3025-S Manual Del Propietário página 9

Cotter Pin
Wheel
Washer
Wheel
Axle Bolt
Figure 1
Upper Cart Brace
Figure 2
Step 3
Remove the pre-attached cotter
pins and washers from the wheel
axle bolts. Place the wheels on the
wheel axle bolts. Then, replace the
washers and lock with cotter pins.
Step 4
Loosen the pre-attached bolts on
the upper cart braces and insert
the bolts into the keyholes on the
cart (figure 1). Press the braces
downward and tighten the bolts
securely through the holes at the
outer side of the cart (figure 2).
Hole
8