Customer Settings; Recommended Settings - Stalgast 801350 Instrucciones De Uso

a. programming of temperatures and times

CUSTOMER SETTINGS

Press . again. The displays will show the following data:
95 C)
o
The arrows can be used to adjust the temperature on display 2.
Press again. The displays will show the following data:
The arrows can be used to adjust the temperature on display 2.
SERVICE SETTINGS (it is recommended that they are not changed)
Press
again. The displays will show the following data:
90 C).
o
The arrows can be used to adjust the temperature on display 2.
Press again. The displays will show the following data:
activation of the pressure switch (0-40 sec.) determining the water level.
The
arrows can be used to adjust the time of water release on display 2.
Press
again. The displays will show the following data:
The arrows can be used to adjust the sanitization time on display 2.
During the setting of the above parameters the display screen is blinking, and the values of the parameters can be changed
using the arrows.
Function Name Function description
P1 sanitization (rinsing) temperature
P2 washing temperature
P3 minimal sanitization temperature
P4 time for water release after the activation of
the pressure switch
P5
sanitization (rinsing) time
b. programming of cycle duration
Press Display 1 will indicate:

RECOMMENDED SETTINGS

- 34 -
- sanitization-rinsing temperature (70-
- washing water temperature (40-70
- minimal sanitization temperature (50-
- time for water release after the
- sanitization time (8-15 sec.).
Recommended value
90ºC
60ºC
82ºC
20 seconds (for pressure of 2 bar)
15 seconds
C).
o