Publicidad
Idiomas disponibles
Idiomas disponibles
Clearing Home Environment
EN
To improve the working efficiency of your robot, put away any
loose cords , rags, slippers, toys, etc.
Open the door of the room to be cleaned, and put the furniture
in its proper place to make more space.
8
Before cleaning, place a physical barrier at the edge of the
stairs and sofa to ensure safe and smooth operation of the
robot.
To prevent the robot from not recognizing the area to be
cleaned, do not stand in the front of the robot, threshold, hall
way, or narrow places.
Preparation Before Use
1. Remove the protective strips
2. Install the side brush
Click
Note: Install the side brush until it clicks into place.
3. Place the charging dock on the level ground against
the wall and connect it to a power outlet
＞ 0.5 m
＞ 0.5 m
＞ 1.5 m
Note:
· Keep the immediate area 1.5m in front of the charger and 0.5m to both sides of
the charging dock clear of objects.
· To ensure you can connect to the robot with your phone well, make sure the robot
and charging dock are within WiFi range.
· Do not place the charging dock in an area with direct sunlight or where other
objects might block the signal, as this may hinder the robot from returning to the
charging dock.
4. Place the robot onto the charging dock to charge
Battery Level Indicator
• White: Battery level is more than 15%
• Orange: Battery level is less than 15%
Note:
· Fully charge is recommended before first-time use.
· Do not install the mopping module while charging. Be extra careful with the wet
mop as it can damage the floor.
EN
9
Publicidad
