Dreame Bot L10S PRO Manual Del Usuario página 8

Connecting with Mi Home/Xiaomi Home App
EN
The appliance works with the Mi Home/Xiaomi Home app, which can be used to control the appliance and make it interact with other smart devices.
1. Download the Mi Home/Xiaomi Home App
Scan the QR code on the robot or search "Mi Home" or "Xiaomi
Home" in the app store to download and install the app.
Under the Cover
2. Add Device
Open the Mi Home/Xiaomi Home app, tap " " in the upper
right, and scan the QR code above again to add "DreameBot L10s
Pro". Please follow the prompts to finish the Wi-Fi connection.
xxxxxx' s home
Add a device
No home environment info Scan
Devices Rooms
Note:
· Only 2.4GHz Wi-Fi is supported.
· The version of the app might have been updated, please follow the instructions
based on the current app version.
10
3. Reset Wi-Fi
Simultaneously press and hold the buttons and until
you hear a voice to indicate that the robot is waiting for the
network configuration. Once the Wi-Fi indicator is blinking
slowly, the Wi-Fi has been successfully reset.
Wi-Fi Indicator
·Blinking slowly: To be connected
·Blinking quickly: Connecting
·On: Wi-Fi connected
Note: If your robot cannot connect to the app successfully, reset the Wi-Fi and add
the device again.
How to Use
1. Turn On/Off
Press and hold the button for 3 seconds to turn on the
robot. Once the power indicator turns solid white, the robot
is in standby mode. To turn off the robot, press and hold the
button for 3 seconds when the robot is not moving. Turning
off the robot will end the current cleaning task.
2. Start Cleaning
Press the button briefly to turn on the robot. Upon activation,
the robot will accurately map out a route, methodically clean
along the edges and walls, then finish by cleaning each room
in an S-shaped pattern to ensure a thorough job.
Note:
· Before a cleaning task, make sure the robot is fully charged and starts from the
charging dock. Do not move the charging dock while the robot is cleaning.
· If the battery is too low, the robot will automatically return to the dock to charge.
It will resume unfinished cleaning tasks after charged to the necessary battery
level. (The breakpoint continuous cleaning function must be enabled on the app
in advance.)
3. Cleaning Mode
DreameBot L10s Pro has four cleaning modes: Quiet,
Standard, Strong and Turbo. The default mode is Standard.
You can specify the cleaning mode in the app.
4. Pause/Sleep Mode
Pause: Press any button to pause the robot during cleaning.
Sleep Mode: The robot will automatically enter Sleep Mode
after 10 minutes of inactivity, then the power and charging
indicators will go off. To wake up the robot, press any button.
Note:
· The robot will turn off automatically if left in Sleep Mode for more than 12 hours.
· When the robot is paused, placing it onto the charging dock will end the current
cleaning task.
5. Do Not Disturb (DND) Mode
DND Mode prevents the robot from automatically starting
cleaning tasks, and the power indicator remains off. You can
enable DND Mode or modify its hours in the app. (The mode is
on by default from 22:00 to 08:00.)
Note:
· Scheduled cleaning tasks will still be carried out during the DND period.
· The robot will continue cleaning after the DND period ends.
EN
11