STERWINS UP20 Instrucciones De Montaje página 199

C) If the carbon brushes need to be
replaced, have this done by a qualified
repair person (always replace the
two brushes at the same time).
2.7 ADDITIONNAL MINI SAW WARNINGS
• Use of hearing protection reduces
the ability to hear warnings (shouts or
alarms). The operator must pay extra
attention to what is going on in the
work area. Do not get distracted, and
always concentrate on the task.
• Operating similar tools nearby
increases both the risk of hearing
injury and the potential for other
persons to enter your work area.
• WARNING: In some countries regulations
define at what time of the day and on
what special days products are allowed to
be used and what restrictions apply! Ask
your community for detailed information
and observe the regulations in order to
preserve a peaceful neighbourhood and
avoid committing administrative offences!
2.8 VIBRATION AND NOISE REDUCTION
To reduce the impact of noise and vibration emission, limit the operating time, use low-vibration
and low-noise operating modes, and wear personal protective equipment. Take the following
points into account to minimise the vibration and noise exposure risks:
1. Only use the product as intended by its design and these instructions.
2. Ensure that the product is in good condition and well maintained.
3. Use correct attachments for the product and ensure they are in good condition.
4. Keep tight grip on the handles/grip surface.
5. Maintain this product in accordance with these instructions and keep it well lubricated
(where appropriate).
6. Plan your work schedule to spread any high vibration tool use across a longer period of time.
2.9 RESIDUAL RISKS
Even if you are operating this product in accordance with all the safety requirements, potential
risks of injury and damage remain. The following dangers can arise in connection with the
structure and design of this product:
→ Health defects resulting from vibration emission if the product is being used over long periods
of time or not adequately managed and properly maintained.
→ Injuries and damage to property due to broken cutting attachments or the sudden impact of
hidden objects during use.
→ Danger of injury and property damage caused by flying objects.
→ Prolonged use of this product exposes the operator to vibrations and may produce
'whitefinger' disease. In order to reduce the risk, please wear gloves and keep your hands
• Operating hours Only operate the product
at reasonable hours - not early in the
morning, late at night or on weekends/public
holidays when people might be disturbed.
Inform yourself about local restrictions.
• Beware of contact with wood / sawdust.
Some eople may have allergies to certain
woods, wearing gloves and a respiratory
mask helps to reduce allergen risks
• This Mini saw is not designed for other
purpose than cutting logs and wood. Never
use this minisaw to trim hedges. Never use
this mini saw to cut multiple logs at once.
• To reduce the risk of fire, personal injury,
and product damage due to a short circuit,
never immerse your tool, battery pack
or charger in fluid or allow a fluid to flow
inside them. Corrosive or conductive
fluids, such as seawater, certain industrial
chemicals, and bleach or bleach-containing
products, etc., can cause a short circuit.
199
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
EN