Publicidad
Idiomas disponibles
Idiomas disponibles
Using the Product as Intended
The 60996 decoder is designed for converting H0 locomoti-
ves with PluX22 interface connectors to NEM 658.
Contents as Delivered
1 Decoder with PluX22 interface
Installation instructions
Warranty card
Safety Notes
• WARNING! Sharp edges and points required for operation.
• Do wiring and assembly work only on a voltage-free or
grounded work mat. Failure to do this can lead to danger-
ous static charge from your body and to damage to the
components.
• Operate the decoder only with the authorized voltage
(see technical data).
20
Technical Information
• Continuous current load at the motor output
• Current load at the light outputs
• Current load at AUX 1 – AUX 4 each
• Current load at AUX + lights (total)
• Current load for motor and AUX 5/6
• Maximum total load
• Maximum voltage
• Short circuit and overload protection at the outputs lights
front (LV), lights rear (LH), AUX 1 – AUX 4 and at the motor
outputs.
≤ 1.1 amps
≤ 250 milliamps
≤ 250 milliamps
≤ 300 milliamps
≤ 1.1 amps
≤ 1.6 amps
≤ 40 volts
Publicidad
