Nash Siren R4 Manual Del Usuario página 11

NOTE: Ensure when taking to a boat to play a fish, the
receiver must be with you to enable you to operate the
alarm rear LED function.
REAR LED SELECTION:
Which Rear LED is illuminated amongst a set of paired
R4 alarms can be chosen independently, or all paired
heads on Channels 1-4 can be illuminated together.
NOTE: Illuminating all paired heads on Channels 1-4 is
a useful function when navigating to avoid multiple lines
at night.
Press and hold the Rear Head LED button on the
Receiver. Keeping the Rear LED button depressed short
press Volume to toggle through your paired R4 Heads on
Channels 1-4 and select which is to be controlled by the
Rear Head LED button:
Control/Illuminate Head #1 (Factory setting)
Control/Illuminate Head #2
Control/Illuminate Head #3
Control/Illuminate Head #4
Control/Illuminate R4 heads paired on 4 channels
1-4 simultaneously
The Receiver LEDs will illuminate in turn as you toggle
through to show which single channel you require
the Rear LED function for. If all 4 LEDs on the receiver
are illuminated the Rear LED on all the paired alarms
in Channels 1-4 will be controlled and illuminated
simultaneously.
Once you have selected the single channel you require or
all 4 heads together release the Rear LED Button and the
Volume
to programme your choice of R4 alarm for the Rear LED
function. The receiver retains your head choice in the
memory between sessions.
TURNING REAR HEAD LED FUNCTION ON/OFF
To turn your selected Rear LED(s) on press and hold for 2
seconds the Rear LED button on the receiver. The LED for
that channel (or all 4 channels) will light green and you
will hear two bleeps of increasing pitch.
Instruction Manual.indd 11 Instruction Manual.indd 11
Button and short press the Rear LED button
11
25/01/2022 12:3 25/01/2022 12:3