Nash Siren R4 Manual Del Usuario página 5

each consecutive bleep the tone
being set.
LED COLOUR AND BRIGHTNESS:
Press and hold the Function
press the Power
options available, and two brightness settings. The
LEDs will cycle through lighting at each colour in both
brightness options. The first press represents the
current setting. Release the Function
the selected colour/brightness.
LED COLOUR OPTIONS ARE:
Red > Blue > White > Green > Purple
BOBBIN GLOW FUNCTION:
Press and hold both Power
buttons for 3 seconds. The alarm will sound two
rising tones and flashes the bobbin LED to indicate
the bobbin LED output is being turned on. The alarm
will sound two falling tones only to indicate the
bobbin LED is being turned off.
R4 Alarms feature an MMCX bayonet push and twist connection and
LED power output to allow them to be used with Siren Night Glo
Bobbins and Siren Night Glo Strong Arm indicators.
SENSITIVITY:
The R4 has five sensitivity settings:
Setting 1
line movement sensitivity
Settings 2-3
Settings 4-5
To adjust sensitivity press and hold the Function
button for 3 seconds. The alarm will sound a number of
tones indicating the sensitivity setting.
Instruction Manual.indd 5 Instruction Manual.indd 5
X
button. There are five LED colour
(Factory setting) Standard distance
Feature the famous Siren speed
sensing technology and our
revolutionary drift sensing technology
Feature the famous Siren speed
sensing technology and our
revolutionary drift and wave sensing
technologies
button, then short
button to set
X
and Function
X
X
5
25/01/2022 12:3 25/01/2022 12:3