Descargar Imprimir esta página

BOIFUN DQ201 Manual Del Usuario página 10

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

4.4 Wi-Fi Connection Steps
A. Turn on the camera;
B. Press and hold the reset button for 5 seconds to reset or restore factory until you
hear the sound of "Boogu" (mean resetting successfully);
C. Run CloudEdge App, click "+" at the top right and select "Battery Camera".
According to the guide on APP, please ensure the camera was activated. (The LED
indicator light is turning red and flickering slowly);
D. Choose 2.4GHz Wi-Fi SSID and enter the password, and then click the "next
step";
E. Click the "OK" to make sure the Wi-Fi information;
F. After entering the following operation interface, please click "Next" and you will
see the "Scan QR Code" interface.
G: Put the QR code in front of the
camera lens about 10-15cm. The
device lens is aimed at the QR
code on the phone screen with a
distance of 10-15cm. After the device
recognizes the QR code, the camera
will make a sound 'Boogu'. After
heard it, please click 'next'.
H. Then, the camera will start
connecting Wi-Fi. After the
connection finished, it will skip to
'Device Found' page, you could edit
the camera name and click 'Done',
and then go to your device list and
start viewing videos.
My camera fails to connect Wi-Fi?
1) Please make sure the Wi-Fi the camera connected is 2.4GHz. In our experience,
network connection is failed in most cases, which is caused by that users used 5GHz
WIFI.
2) Make sure the password correction of the Wi-Fi. (Note: the password of the WiFi
cannot include single quote, underline, space and virgule (/).
3) Check the number of the devices your router connected. In general, the router has
a connection limits. Once the devices that your router connected excess the its max
limit numbers, other devices will cannot connect the router.
4) Make sure the QR code on the phone screen is normal and the distance between the
phone and the camera lens is 10-15cm (3.9-5.9inch) during the scanning process.
5) After checking the above information, if the camera cannot connect the Wi-Fi,
please try to re-download the APP, reset the camera and restart the router, and then
add the camera again.
6) If you tried all steps, but still no luck, please message your order and problem to
admin@boifun.net.
6

Publicidad

loading