Publicidad
Idiomas disponibles
Idiomas disponibles
5. Camera Installation
How to install with wall mount?
A. Select the installation location;
B. Take the camera and your phone to the installation location;
C. Use the Installation Guide in the App to diagnose the signal strength of your Wi-Fi
network. (It is suggested to install the camera on a place that has a strength Wi-Fi
signal so that this camera can works well for you.
D. Fix the camera to the wall with an electric drill and two screws. It is suggested to
install this camera at 2.4-3m from the ground."
Tips:
● Please make sure the wall or surface where you want to install the camera is flat.
For easier installation, it is suggested to use drill. Concrete wall may not suitable for
the installation.
● Please do not install the camera at a position that nears heat source, such as Air
conditioner outdoor unit and Kitchen smoke outlet.
● Try to avoid installing the product on the side of a lively road. Frequent pedestrians
and vehicles will keep waking up the camera, resulting in frequent alarm messages
and extremely fast power consumption.
● Please do not install the camera at a position away the router. The product needs a
good Wi-Fi signal to works well.
● When installing the camera, it's not suggested to make the PIR sensor vertically
face the moving object, otherwise, it may not detect the motion events. It is
suggested to make the angle between PIR sensor and detected object larger than
15 degree.
Extra Tools you need:
Step Ladder
7
Power Drill
Publicidad
