BOIFUN DQ201 Manual Del Usuario página 9

Note: Please insert the Micro SD card before power on, otherwise, the SD card cannot
be detected.
4.2 Power on Camera
Press and hold on the power button for 5s to turn on camera (If it can't be powered
on, please plug in DC 5V/2A power adapter to charge the camera for 15min first).
The indicator with red light blinking slowly means the camera is started successfully.
If the indicator is not in red light blinking slow condition, please reset this camera.
Power Key
Cannot turn on my camera?
● Charge the camera, and then try to turn on it.
● Press and hold the power key until turning on the camera. (can try many times)
● If you tried the above steps, but still no luck, please message your order and
problem to
admin@boifun.net
4.3 Connect the Camera
Note:
● Put the camera and smart phone I to 3 feet (30 to 100cm) away from the router to
set Wi-Fi.
● The camera only supports 2.4GHz Wi-Fi. It doesn't support 5GHz WIFI.
Working Status
indicator
bottom
.
30cm~100cm
5
Router
front
Smartphone