George Foreman MCAFD900D Manual De Instrucciones página 5

Idiomas disponibles

USING THE DIGITAL CONTROL PANEL

1. When the unit is not plugged in, the digital control panel display will be blank. To

start, plug the power cord into the wall outlet and the display will illuminate. If the

unit is not used for 5 minutes, the unit will go into sleep mode. Press any button to

start it back up.

2. COOKING FUNCTIONS (A): The unit has 8 preset cooking functions. Push the up

and down arrows to move through the different cooking functions. Once you get to

the function you desire, press START/ENTER.

3. START/ENTER button (B): Once START/ENTER is pushed on the mode you

selected, the display will flash the default temperature setting for that function. You

can adjust the temperature using the up and down arrows. Once the temperature is

at your desired setting, press START/ENTER.

The default time will display on the control panel. You can adjust the time by using

up and down arrows. Once the time is at your desired setting, press START/ENTER.

At this point the unit will start.

4. CANCEL button (C): The CANCEL button will help you start over in your selection

or stop the the cooking process. When choosing a preset cooking function, press

CANCEL once to move back and choose a different function. Press and hold

CANCEL for 3 seconds to return to the default display.

5. UP/DOWN arrows (D): Press the up/down arrows for selection of cooking presets,

changing temperature and changing time. If you press the up/down arrows, the

temperature will change by 5 degree increments and the time will change by 1

minute increments.

6. TIME/TEMPERATURE DISPLAY (E): During the cooking cycle, you can press

START/ENTER to toggle between displaying the time remaining and the set

temperature. When display is showing the time remaining, you can use the up/

down arrows to change the time remaining on the cooking function.

While adjusting the temperature during the cooking cycle, the display will flash.

After no changes have been made for 1 second, the display will flash 3 more times

and return to solid display of the set temperature. You can also press START/ENTER

to set the new temperature.

7. SWITCHING TEMPERATURE SCALES: When the unit is in default display, hold the

CANCEL button for 3 seconds to change the temperature unit from Fahrenheit to

Celsius or Celsius to Fahrenheit.

MCAFD900D_29203_ES_IB_A.indd 5

7/14/22 8:51 AM