KUNERT MOLTO Manual De Instrucciones página 8

when the parking device is activated.
This product shall not be used, as soon as the child is able to sit by himself, roll over and can push itself
up on its hands and knees. Maximum weight of the child: 9 kg. - this refers to a carrycot.
WARNING This seat unit is not suitable for children under 6 months.
WARNING Ensure that all the locking devices are engaged before use.
WARNING To avoid injury ensure that your child is kept away when unfolding and folding this product.
WARNING Check that the pram body or seat unit or car seat attachment devices are correctly engaged
before use.
WARNING To avoid injury ensure that the child is kept away when unfolding and folding this product.
WARNING Use a harness as soon as the child can sit unaided.
WARNING Always use the restraint system.
The pram seat is equipped with a safety bar. It is mounted on the pram by sliding the hooks into the
correct slots on both sides of the seat, pressing at the same time red buttons in order to lock the safety
bar. When mounted, release the buttons (fig. 20). Always check whether the safety bar is mounted
correctly. In order to remove the safety bar, press the red buttons to release hooks on both sides of the
pram and then pull the safety bar up.
The pram is equipped with a 5-point safety harness. After placing the child on the pram seat, push the
buckles of the harness into the lock (fig. 21) and adjust the length of the straps by pulling them tight. To
unbuckle the harness, press on the sides of the buckle and pull them apart.
The seat is equipped with a cover that can be mounted with press studs on both sides of the booth (Fig.
22).
The pram comes with a shopping basket. To attach the basket on the chassis of the pram, fasten it to the
lower part of the pram using the snaps.
The pram is equipped with a rain cover which is pulled over it. The rain cover has ventilation outlets at the
level of the child's face.
The pram also comes with a car seat option for children. To mount the car seat, the car seat adapters
need to be mounted first to the chassis. To mount the adapters on the chassis, click them into designated
one on each side of the pram
slots (
seat adapters are correctly mounted. Both adapters should be locked. After correct mounting of the car
seat adapters on the chassis, you can move on to mounting the car seat. To mount the car seat, you need
to fit its buckles into matching plastic handles on the adapters (fig. 24).This pram does not substitute a
cradle or a crib. If your child needs to sleep, it is recommended to put him/her in an appropriate carrycot,
cradle or crib. The car seat comes with a hood and a cover which are mounted with snaps. The car seat is
equipped with an adjustable handle. The handle is adjusted by pressing the red buttons on both sides of
the car seat and moving the handle into a desired position (fig. 25).To remove the car seat, you need to
pull the levers on both sides of the car seat (fig. 26). To dismantle the adapters, press the buttons on the
both sides of the pram chassis. Car seats of the Kunert model: Carlo and Kent are dedicated to this stroller
model.
To adjust the handle height, you need to press the buttons on both sides of the handle and then adjust
the height while simultaneously pressing the buttons (fig. 27).
To mount the carrycot on the chassis, click it into designated slots (one on each side of the pram) (figs 10,
11) until the hooks are locked. The hooks are locked automatically. Warning The carrycot should always
be mounted rear-facing (so that the child faces the person pushing the pram). To take the carrycot off,
press the adapter buttons on both sides of the pram (fig. 11) and lift the carrycot up using the handle.
The carrycot has a permanently attached hood. You can adjust the hood as necessary by pressing buttons
on both sides of the hood and positioning the hood as necessary (fig. 12). The hood has a handle which is
used to carry the carrycot (fig. 13).
SAFETY BAR
SAFETY HARNESS IN THE PRAM
PRAM COVER
SHOPPING BASKET
RAIN COVER
MOUNTING THE CAR SEAT
) (fig. 23).WARNING! Before using the car seat, ensure that the car
HANDLE HEIGHT ADJUSTMENT
MOUNTING AND REMOVAL OF THE CARRYCOT
CARRYCOT HOOD
CARRYCOT COVER
8